45mm (1.3/4") Bore Vacuflex Lightweight Ducting x 10 Mtr
Part No: VL17BLK10M
Manufactured in the UK by Griflex.
Internal diameter: 45mm (1")
External diameter: 50mm
Wall thickness: 0.5mm overall
Length: 10 Mtr supplied in a coil
Weight: 2.5 Kg per 10 Mtr
Min. bend radius: 23mm
Working pressure: 1.1 Bar
Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20 Deg C.
Weights are approximate dependant upon working tolerance and density of materials.
Bending diameter information is intended as a guide to the minimum bend radius at 20 Deg C ambient temperature without restricting the bore. It does not mean that the hose cannot be bent below the given dimensions but restriction is likely to occur.