115mm (4.1/2") Bore Vacuflex Lightweight Ducting x 10 Mtr
Manufactured in the UK by Griflex.
Internal diameter: 115mm (4.1/2")
External diameter: 120mm
Wall thickness: 0.7mm overall
Length: 10 Mtr suplied in a coil
Weight: 8 Kg per 10 Mtr
Min. bend radius: 58mm
Working pressure: 0.2 Bar
Maximum working pressure is based on a factor of safety of 3:1 on short term burst pressure at 20 Deg C.
Weights are approximate dependant upon working tolerance and density of materials.
Bending diameter information is intended as a guide to the minimum bend radius at 20 Deg C ambient temperature without restricting the bore. It does not mean that the hose cannot be bent below the given dimensions but restriction is likely to occur.
|test2||test desc 2|